Main Description :
1.  24 ports patch panel, Cat.6A FTP type. The structure of each port of this patch 
     panel is same which makes sure that the performance of each port is consistent.
2.  The outstanding shielding effect: back dust proot cover and grounding device are 
     combined in this patch panel. All kinds of cables with different dimensions can 
     be fixed on the patch panel. The shielding foil of the cabels and the grounding 
     device of the patch panel can be connected availably.
3.  According to the standard of ISO/IEC 11801:2002 CLASS E and ANSI/TIA/EIA/568B.2-1 
     Cat.6A standard. T568A  and T568B punching sequence are both compatible. Fitting 
     for horizontal distribution in the equipments room and equipments connecting.
4.  Connecting: FCC port for Cat.6 FTP patch cord and IDC for horizontal distribution 
5.  Compatibility: Compatible for FTP Cat.6A or Cat.56、Cat.5e general cable 
     distribution systems.

Technique Characteristics:
1.  Entire high-carbon steel outer frame, with plastic powder cladding.
2.  RJ45 jack frame material: PBT, golden plated phosphor bronze pins; Shielding shell 
     of the RJ45 jack: Brass housing with nickel-plated. IDC clip: Tinned phosphor 
     bronze pins.
3.  Fitting for 22AWG/23AWG/24AWG cables, punching duration: 250 times. FCC ports 
     inserting duration: 750 times.
4.  Cabling sequence: T568A & B
5.  Punching tools: standard LSA tool.
6.  Testing condition of transmitting capability: 500MHz.