Cat.6 UTP RJ45 Field Module Plug
They are used in our factory's serve room.
Industrial Plug RJ45 UTP Cat.6
CAT6 Class Ea RJ45 plug to be assembled in the field
1. UTP&FTP TYPE: 1piece Design
2. Easy Assembly-easily terminated in the field in 2 minute without any special tools
3. Wire Connection: Stranded wire AWG 27/7 to 22/7, wire diameter from 0.46 to 0.76 mm
4. Wire Connection: Solid wire AWG 26/1 to 22/1, wire diameter from 0.4 to 0.76 mm
5. Transmission Characteristics: CAT6A per ISO/IEC 11801 Ed.2.2:2011-06
6. Compliance with class Ea to ISO/EIC 11801 Ed.2.2.2011-06,DIN EN 50173-1:2011-09 10 GB it Suitable according to IEEE 802.3an
7. Suitable for Power over Ethernet (PoE, PoE plus, and UPoE)
8. Cable Jacket Diameter from 6 to 9.5 mm
9. Adjustable Strain Relief (6mm to 9.5mm Cable OD)
10. Load Bar for Faster and Easier Wire Pattern Termination
1. Operation temperature: -40℃to 60℃，Relative humidity: 85%(30℃)，Air pressure: 70-106Kpa.
2. Gold Plated Phosphor Bronze Blade: phosphor bronze and gold plating (3-50uinch), mating durability not less than 750 cycles.
3. Anti-bum performance: product made from Kirsite\PC or PCB(UL94V-0), meeting the international standard
4. Intermediate resistance: no more than 20m ohm in normal atmosphere pressure (not including bulk resistor)
5. Insulated resistance: no less than 1,000M ohm in normal atmosphere pressure
6. Intensity of anti-currency: DC 1,000V (AC,700V), no puncture and flash-over phenomenon in one minute
7. Retention strength: 7.7kg between jack and plug
8. Label: clear label to ensure easy to management.